그리고 fixed ratio gear oil in electric vehicles presents a deceptively simple challenge: one gear set, constant mesh, operating across a massive speed and load range. Get the EV 기어 오일 wrong, and you compromise efficiency, noise, and durability.
New generation formula addresses precisely these challenges, developed through collaboration with EV manufacturers facing real-world performance issues with adapted conventional oils.
Understanding Fixed Ratio Transmission Demands
Unlike multi-speed ICE gearboxes, EV single-speed reducers operate from zero to maximum RPM without shifting. This creates unique stress patterns for electric vehicle gear oil. At low speeds with maximum torque during acceleration, boundary lubrication conditions dominate. At highway speeds, the same gearset spins at 12,000-16,000 RPM, generating intense heat in a compact housing.
Traditional 기어 오일 formulated for ICE transmissions assume:
Lower maximum speeds (typically under 6,000 RPM)
Intermittent high-load periods during shifting
Higher operating temperatures from engine heat
EV reducers invert these assumptions. They need EV 유체 properties that perform across wider speed ranges while maintaining lower bulk temperatures—but handling localized hot spots that can exceed 150°C at gear tooth contacts.
Three Technical Pillars
- Advanced synthetic base stocks form the foundation. PAO and ester blends provide the low-temperature fluidity essential for cold-start efficiency while maintaining viscosity stability at elevated temperatures. This isn’t just about viscosity index—it’s about shear stability under the extreme conditions in meshing gear teeth.
- Proprietary additive chemistry balances competing demands. Achieving high 유전체 강도 (typically >35 kV) while maintaining anti-wear protection requires careful additive selection. Many traditional extreme pressure additives contain active sulfur and phosphorus that work beautifully for gear protection but create electrical conductivity issues.
- TERZO’s formula uses ashless dispersants and non-conductive anti-wear systems that protect copper windings and rare earth magnets while preventing micro-pitting on gear surfaces. Testing shows wear rates 40% lower than adapted ATF fluids commonly used in early EV models.
- Thermal oxidation stability extends service life. 그리고 TERZO 트랜스 EV 고정 기어비 오일 targets 200,000 km drain intervals under normal operating conditions. Accelerated oxidation testing at 150°C shows minimal viscosity increase and acid number growth over 1,000 hours—translating to maintained performance across the vehicle’s operational life.
Trans EV: Product Specifications
그리고 TERZO 트랜스 EV 고정 기어비 오일 represents TERZO’s commitment to electric vehicle lubrication innovation:
Key Performance Features:
- Excellent insulation properties preventing current leakage in e-axle 시스템
- Electric drive cooling capabilities managing high-speed thermal loads
- Thermal degradation control maintaining viscosity stability over extended service
- 친환경 포뮬러 using non-toxic base oils and additives
- EU REACH and RoHS compliance meeting strict environmental certifications
Application Specifications:
- 새로운 에너지를 위해 특별히 설계된 전기 구동 시스템
- Optimized for 고정 비율 전송 and single-speed reducers
- Compatible with copper components and rare earth magnet materials
- Suitable for passenger EVs, electric SUVs, and commercial electric vehicles
Real Application Performance
Working with a mid-size European OEM during their EV platform development revealed specific pain points. Their initial EV 변속기 오일 choice—a low-viscosity synthetic ATF—showed acceptable performance in warm weather testing but demonstrated three issues in validation:
- Noise increase at cold temperatures due to insufficient film thickness
- Viscosity breakdown after 100,000 km in high-usage vehicles
- Corrosion indicators on copper bearing surfaces
Switching to TERZO’s fixed ratio gear oil formulation during pre-production testing eliminated these issues. Noise levels decreased 3 dB across the temperature range, wear metal analysis showed 60% reduction in copper content, and projected service life extended to match vehicle warranty periods.
Supply Chain Advantages
Manufacturing capability matters increasingly as trade tensions affect automotive supply chains. TERZO’s production facilities provide:
- Batch-to-batch consistency meeting automotive quality standards
- Flexible packaging options from bulk IBCs to retail-ready bottles
- Technical support for specification compliance and application guidance
- Rapid formulation adjustment capability for customer-specific requirements
- ISO/IATF/API certifications ensuring quality management
For regional agents and channel partners, this translates to reliable inventory availability and responsive technical service—critical differentiators when competing for OEM contracts.
Environmental and Regulatory Alignment
EV gear oils face evolving regulatory scrutiny. TERZO’s formula biodegradability characteristics exceed current requirements while anticipating stricter future standards. Low toxicity formulation reduces handling concerns and disposal requirements.
For energy companies diversifying into EV infrastructure, understanding electric vehicle lubricant lifecycle impacts supports broader sustainability messaging. TERZO’s formulation enables transparent communication about environmental performance.
Why Choose TERZO
TERZO has established itself as a trusted EV 기어 오일 제조업체 with comprehensive capabilities:
- R&D expertise in electric vehicle lubrication 기술
- OEM/ODM customization services for specific application requirements
- Wholesale export capabilities serving global markets
- Quality certifications (SGS, ISO, IATF, API) ensuring product reliability
- Regional presence across Asia-Pacific, Africa, Central Asia, and Middle East markets
Global distributors and regional agents benefit from TERZO’s commitment to innovation, quality, and customer partnership. Our rigorous quality management system and environmental responsibility align with the values of forward-thinking EV manufacturers.
TERZO’s new generation fixed ratio gear oil positions partners for this transition. Whether you’re an OEM engineer specifying 전기차 유체 for next-generation platforms, a distributor building product portfolios, or an investor evaluating automotive supply chain opportunities, understanding specialized electric vehicle lubricant requirements becomes increasingly essential.
The technology works. The market is growing. The question for potential partners: how quickly can you integrate this capability into your strategy?
TERZO의 포괄적인 솔루션에 대해 자세히 알아보기 EV gear oil analystic 그리고 지원 방법 전 세계 OEM 파트너.
